Throttle Linkages

Throttle linkage rods and carburettor linkage kits for connecting your throttle pedal or cable to the carburettor. These parts transfer pedal movement to carb opening, so getting the length and adjustment right matters for clean, consistent throttle response.

Rods are available in a range of lengths from 4 inches up to 18 inches, so you can pick the one that matches the distance between your throttle arm and linkage point. The carburettor linkage kit allows for 1 inch of adjustment, which is handy if you need to fine-tune travel without swapping rods.

  • Throttle linkage rods in multiple lengths (4" to 18")
  • Adjustable carburettor linkage kit

Frequently asked questions

How do I know what length throttle linkage rod I need?

Measure the distance between your throttle arm and the linkage pivot point on your setup, then choose the rod length closest to that measurement. Rods are available from 4" up to 18" in this range.

What does the carburettor linkage kit do?

It connects your throttle linkage to the carburettor and allows for 1" of adjustment, so you can fine-tune throttle travel without changing the rod itself.

Can I adjust a fixed-length linkage rod?

The rods themselves are a set length, so if you need fine adjustment you'd pair one with an adjustable linkage kit rather than relying on the rod alone.

11 Products Found