Ball Joints & Components

Ball joints are the pivot point between control arms and steering knuckles, letting the suspension steer and move while keeping wheel alignment accurate under load. This range covers ball joints and related components such as upper ball joint boss assemblies and threaded ball joints in various sizes.

Choosing the right joint comes down to matching the thread size, boss configuration and stud length to your control arm and knuckle. Wear shows up as play, clunking, uneven tyre wear or vague steering, and any of these are reasons to inspect and replace before the next session.

Frequently asked questions

What does a ball joint do?

It's the pivot point between the control arm and steering knuckle, allowing the suspension to move and steer while keeping the wheel correctly aligned through corners and over bumps.

What are the symptoms of a failing ball joint?

Common signs are vague or wandering steering, a clunk over bumps or on turn-in, uneven tyre wear, and noticeable play when the wheel is rocked while jacked up. Split dust boots or dry, contaminated grease are also warning signs.

Is it safe to keep racing on a worn ball joint?

No. A worn joint can change camber and toe unexpectedly and in severe cases the stud can separate from the housing, causing a sudden loss of suspension control. Replace it before the next session and recheck alignment and torque afterwards.

28 Products Found