Fittings and Plugs
AN fittings and plugs for building and modifying fuel, oil and coolant lines, covering hose ends, adapters, unions and plugs from Fragola's Push-Lite and Pro-Flow ranges. Hose ends come in straight, 30°, 45°, 60°, 90° and 120° angles to suit different routing and clearance needs around the engine bay.
Adapters convert between AN sizes or from pipe thread (NPT/NPS) to AN, and include tees, unions, weld bungs and O-ring boss adapters for connecting into pumps, blocks and other threaded ports. Plugs cap off unused AN ports when a line isn't needed.
- Push-Lite and Pro-Flow hose ends (straight through 120°)
- AN to pipe thread adapters
- Tee and union adapters, reducers
- O-ring boss adapters and weld bungs
- AN flare plugs
Frequently asked questions
How do I choose the right hose end angle?
Pick the angle, straight, 30°, 45°, 60°, 90° or 120°, based on how the hose needs to route around obstructions and how much clearance you have at the fitting point.
What's the difference between Push-Lite and Pro-Flow hose ends?
They're two separate Fragola series of hose ends; check the AN size and fitting style needed for your hose to pick between them.
When do I need an AN flare plug?
Use a flare plug to seal off an unused AN port, such as a spare fitting on a manifold or fuel log.
What are weld bungs used for?
Weld bungs let you add an AN fitting point to a tank, pan or tube by welding the bung directly onto the metal.
